Arc (EnRoute)

Three methods to create arcs

Drawing an Arc by Center, Start and Finish

1. Activate the Arc Command

2. In the precision toolbar, select Arc by Center, Start and Finish

3. Left click to define the arc center

4. Move the mouse and left click again to define the start point

5. Click again to define the arc end point

6. Right click to exit the arc tool

Drawing an Arc by Center, Radius and Angle

1. Activate the Arc Command

2. In the precision toolbar, select Arc by Center, Radius and Angle

3. Define the arc radius and sweep angle in the precision toolbar

4. Define the arc center in the precision toolbar and click APPLY to create the arc

5. Repeat to create more arcs, or right click to exit the tool

Drawing an Arc by Three Points

1. Activate the Arc Command

2. In the precision toolbar, select Arc by Three Points

3. Left click to define the arc start point

4. Click again to define the end point

5. Click a final time to define a point along the arc

6. Repeat steps 3-5 to create more arcs, or right click to exit the tool